fbpx

KRIX MX-20 MODULAR SPEAKERS

KRIX MX-20 MODULAR SPEAKERS

• Behind screen cinema quality speakers • Easy to install • Krix Infinite Baffle Wall Designed for dedicated home cinemas with an acoustically transparent screen, the MX-20 will deliver your favourite movie soundtracks with supreme definition and accuracy, right through the picture and into your seat. EXPERIENCE REALISM For a wall of sound that plunges through the big screen, the MX-20 will provide the impact you’re looking for. With every aspect optimised to deliver the most faithful reproduction of movie soundtracks, from a whisper to the explosion immediately after, these modules provide a true commercial cinema experience at home. The MX-20 is designed for cinema rooms four to seven metres long. This system comprises five modules, all of which are the same height and a slim line depth of just 295mm for simple installation into a wall cavity. The main speakers feature a 255mm bass-mid driver which has a 50mm voice coil developed to offer low harmonic distortion, especially in the critical midband. The high frequency drive unit is a damped, high power, 26mm doped fabric dome tweeter, coupled with a proprietary Krix waveguide, for optimum dispersion over the entire working bandwidth. Each subwoofer contains a large 380mm paper cone driver with a 100mm edge-wound copper voice coil, dual spider assembly, and vented magnet assembly. For the ultimate cinema experience at home, play it through Krix.

KRIX MX-20 MODULAR SPEAKERS Product Description

Brand Krix
LCR SPEAKER MODULES Frequency Range 40Hz-20kHz in room response
Power Handling IEC AES 250 Watts
Power Handling Program 500 Watts
Sensitivity 97dB for 2.83 volts at 1 metre
Impedance 8 Ohms
Configuration 2-way
Enclosure Type Bass reflex, front vented
Low Frequency Driver Single 255mm (10”) paper cone
driver. 50mm (2”) voice coil wound on high powered kapton former, with
ventilated magnet assembly and copper shorting ring for low distortion
High Frequency Driver 26mm (1”) doped fabric dome with
large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40
short throw waveguide
Input Terminals Gold plated spring terminals
Dimensions 1220mm high x 365mm wide x 295mm
deep (2210mm wide including subwoofer modules)
SUBWOOFER MODULES Frequency Range 25Hz-500kHz in room response
Power
Handling IEC AES
700 Watts
Power
Handling Program
1400 Watts
Sensitivity 100dB for 2.83 volts at 1 metre
Impedance 8 Ohms
Enclosure
Type
Bass reflex, front vented
Low Frequency
Driver
Single 380mm (15”) paper cone
driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and
vented magnet assembly
Input
Terminals
High level gold plated
spring terminals
Dimensions 1220mm high x 550mm wide x 295mm
deep (2210mm wide including LCR modules)
SYSTEM
RECOMMENDATIONS
Recommended Room Depth 4m – 7m
Min.
Screen Size 16:9
100″ (2210mm x 1243mm)
Minimum
Screen Size 21:9
120″ (2806mm x 1184mm)

Reviews

There are no reviews yet.

Be the first to review “KRIX MX-20 MODULAR SPEAKERS”

Your email address will not be published. Required fields are marked *