ANTHEM A2 AMPLIFIER Product Description
| Brand | Anthem | ||
| GENERAL | Inputs | 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) |
|
| Outputs | 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack) |
||
| THD+N (225 W into 8 Ω) |
0.001% at 1 kHz, 0.03% at 20 kHz |
||
| IMD | 0.0005% (CCIF, 225 W into 8 Ω) |
||
| POWER BANDWIDTH |
10 Hz to 100 kHz (+0 -3 dB, 225 W into 8 Ω) |
||
| FREQUENCY RESPONSE |
20 Hz to 20 kHz (+0 -0.15 dB), 5 Hz to 100 kHz (+0 -2 dB) |
||
| INPUT SENSITIVITY (RCA and XLR 0 dB inputs) |
1.5 Vrms in for 225 W out into 8 Ω |
||
| INPUT IMPEDANCE |
10 kΩ (RCA), 15 kΩ (XLR) |
||
| DAMPING FACTOR |
360 at 1 kHz (ref. 8 Ω) |
||
| S/N RATIO |
120 dB, A-weighted (ref. 225 W) |
||
| CROSSTALK (between any two channels) |
-78 dB at 1 kHz | ||
| VOLTAGE GAIN |
29 dB | ||
| SLEW RATE |
30 V/µs | ||
| SWITCHES | Front Panel | Power (On/Off) | |
| Rear Panel |
On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR) |
||
| POWER OUTPUT | Impedance | # of Channels Driven | |
| 8Ω | 1 | 225 W | |
| All | 200 W | ||
| 4Ω | 1 | 370 W | |
| All | 300 W | ||
| 2Ω | 1 | 535 W | |
| All | 410 W | ||
| POWER REQUIREMENTS | SUPPLY VOLTAGE | 105 to 130 V, 60 Hz | |
| POWER CONSUMPTION |
800 W | ||
| DIMENSIONS | Height | 7-5/8 inches (19.4 cm) including feet |
|
| Width | Faceplate 19-1/4 inches (49 cm), Chassis 17-1/4 inches (43.8 cm) |
||
| Depth | 13-1/2 inches (34.3 cm) |
||
| Weight (unpacked) |
34 lb (15.5 kg) | ||
Reviews
There are no reviews yet.