ANTHEM D2v 3D PROCESSOR Product Description
Brand | Anthem | ||||
VIDEO SWITCHING | Composite and S-Video | 70 MHz | |||
Component | Y | Pr | Pb | ||
110 MHz | 90 MHz | 80 MHz | |||
ANALOG AUDIO | Input Impedance | 20 kΩ | |||
Output Impedance | Main-RCA | XLR | Zones 2/3 and Record | ||
300 Ω |
600 Ω | 51 Ω | |||
Rated Input |
2.0 Vrms | ||||
Maximum Input |
5.3 Vrms | ||||
Minimum Load |
5 kΩ | ||||
Rated Output (100 kΩ load) |
2.0 Vrms | ||||
Maximum Output | RCA | ||||
6.3 Vrms | |||||
XLR | 12.6 Vrms | ||||
Headphone Output |
100 mW into 32 Ω at 0.2% THD+N |
||||
Volume Control Range |
Main | ||||
– 95.5 dB to +31.5 dB (in 0.5 dB increments) |
|||||
Crosstalk (at 1 kHz) |
82 dB between channels; 86 dB between inputs |
||||
XLR Pin Configuration |
Pin 1: Ground, Pin 2: Positive, Pin 3: Negative |
||||
DIGITAL AUDIO | Crossover | High-Pass Slope (small speaker setting) |
Low-Pass Slope (subwoofer) | Frequency (adjustable) | |
12 dB/octave (2nd order) |
24 dB/octave (4th order) | 25 Hz to 160 Hz (in 5 Hz increments) |
|||
Tone Control | Fliter Type | Range | Bass Turnover Frequency | Treble Turnover Frequency | |
Shelf | +/- 12 dB | 200 Hz | 2 kHz | ||
Analog-to-Digital Conversion S/N Ratio (at digital Rec output) (IEC-A Filter) |
100 dB | ||||
MAIN PATH (RCA AND XLR OUTPUTS) | Frequency Response and Bandwidth |
Analog Direct Inputs | Analog-DSP Inputs at 24/96 | Digital Inputs at 24/96 | |
10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 130 kHz (+0 -3 dB) |
10 Hz to 20 kHz (+0 -0.3 dB), 2 Hz to 44.1 kHz (+0 -3 dB) |
10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 45 kHz (+0 -3 dB) |
|||
THD+N (at Rated Input and Output) | Analog Direct Inputs | Analog-DSP Inputs at 24/48 or 24/96 |
Digital Inputs at 24/48 or 24/96 |
||
0.006% (80 kHz BW) |
0.004% (AES17 Filter) | 0.004% (AES17 Filter) | |||
IMD (CCIF at 15 kHz and 16 kHz) | Analog Direct Inputs | Analog-DSP Inputs at 24/48 | Digital Inputs at 24/48 or 24/96 |
||
<0.001% | 0.00001 | 0.00001 | |||
S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) | Analog Direct Inputs | Analog-DSP Inputs at 24/48 or 24/96 |
Digital Inputs at 24/48 or 24/96 |
||
107 dB | 101 dB | 104 dB | |||
ZONE 2 AND ZONE 3 PATHS | Frequency Response and Bandwidth |
20 Hz to 20 kHz (+0 -0.1 dB), 3 Hz to 140 kHz (+0 -3 dB) |
|||
THD+N (at Rated Input and Output) |
0.06% (80 kHz BW) | ||||
IMD (CCIF at 15 kHz and 16 kHz) |
0.0006 | ||||
S/N Ratio (ref. 2.0 Vrms, IEC-A Filter) |
97 dB | ||||
FM TUNER | Sensitivity | 50 dB S/N | IHF | ||
13 dBµ typical, 25 dBµ max. |
10 dBµ typical, 20 dBµ max. | ||||
S/N Ratio | Mono | Stereo | |||
75 dB typical, 65 dB min. |
69 dB typical, 60 dB min. | ||||
Distortion | Mono | Stereo | |||
0.2% typical, 1.0% max. |
0.3% typical, 1.5% max. | ||||
Stereo Separation |
40 dB typical, 25 dB min. |
||||
Alternate Channel Selectivity (+/- 400 kHz) |
70 dB typical, 60 dB min. |
||||
Frequency Response |
25 Hz to 15 kHz (+0 -2 dB) |
||||
AM TUNER | Sensitivity (20 dB S/N) | 49 dBµ typical, 56 dBµ max. |
|||
S/N Ratio |
50 dB typical, 43 dB min. |
||||
Distortion | 0.7% typical, 2.0% max. |
||||
One-Signal Selectivity (+/- 10 kHz) |
24 dB typical, 18 dB min. |
||||
CONTROL | Infra Red | Carrier Frequency | Maximum 12 V Supply Current | Maximum Emitter Current | |
38 kHz | 150 mA | 60 mA per output | |||
RS-232 Interface | Connection | Pinout (D2v side) | Baud Rate | Configuration | |
DB-9F, straight-wired |
Pin 2: Tx, Pin 3: Rx, Pin 5: Ground |
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
8 data bits, 1 stop bit, no parity bits, flow control (RTS/CTS, none) |
||
Trigger Outputs | Polarity | Maximum Current at 12 VDC | Sequential Delay | ||
tip positive, sleeve ground |
300 mA between all three triggers |
250 ms | |||
POWER REQUIREMENT |
Consumption | Maximum 170 W | |||
DIMENSIONS | Height | 5-7/8 inches (14.9 cm) including feet; rack-mounting: 3 rack units without feet |
|||
Width | Standard version | Rack-Mount version | No-Handle version | ||
19-1/4 inches (49 cm) |
19 inches (48.3 cm) | 17-1/4 inches (43.8 cm) | |||
Depth | 15-1/4 inches (38.7 cm) |
||||
Weight (unpacked) | 27 lb (12.3 kg) | ||||
AVAILABLE FINISH | Black | ||||
Reviews
There are no reviews yet.